Apple silicon chips are designed to minimise the power and energy they use without compromising their performance. One of the many tricks they use is to run the cores in their CPUs at variable frequencies, and in more recent models to shut down those cores they don’t need. At the start of the year, thanks to the many who contributed information about their Macs, we were able to assemble a table of CPU core frequencies for all the M-series chips then available. Those demonstrated that frequencies differed between families such as M1 and M2, and between models within each family such as M2 Pro and Max, as well as between P and E cores.

Since then Apple has released two new chips, the M3 Ultra available in the current Mac Studio, and most recently the base M5 that has recently been impressing so many. This article briefly reviews what we know about CPU core frequencies, and appeals for information about those two new chips.

The best way to discover which frequencies are supported by the P and E cores in the CPU of an Apple silicon chip is using the output of the command tool powermetrics. This lists frequencies for P and E cores, and this article assumes that those it gives are correct. Although it’s most likely that these frequencies aren’t baked into silicon, so could be changed, I’ve seen no evidence to suggest that Apple has done that in any release Mac.

Frequencies

If powermetrics is to be believed, then the maximum frequencies of each of the CPU cores used in each generation differ from some of those you’ll see quoted elsewhere. Correct values should be:

• M1 E 2064 MHz or 2.1 GHz; P 3228 MHz or 3.2 GHz;
• M2 E 2424 MHz or 2.4 GHz; P 3696 MHz or 3.7 GHz;
• M3 E 2748 MHz or 2.7 GHz; P 4056 MHz or 4.1 GHz;
• M4 E 2892 MHz or 2.9 GHz; P 4512 MHz or 4.5 GHz.

However, not all variants within a family can use those maximum frequencies. The full table of frequencies reported by powermetrics is:

This is available for download as a Numbers spreadsheet and in CSV format here: mxfreqs

Why those frequencies?

Depending on workload, thread Quality of Service, power mode, and thermal status, macOS sets the frequency for each cluster of CPU cores. Those used range between the minimum or idle, and the maximum, usually given as the core’s ‘clock speed’ and an indication of its maximum potential performance. In between those are as many as 17 intermediate frequencies giving cores great flexibility in performance, power and energy use. Core design and development uses sophisticated models to select idle and maximum frequencies, and evidently to determine those in between.

Looking at the table, it would be easy to assume those numbers are chosen arbitrarily, but when expressed appropriately there are patterns. Apple’s engineers have clearly put considerable effort into picking optimised frequencies for each of the families and variants within them. If you think this is fine detail and only the maximum frequencies count, then bear in mind that both P and E cores spend a lot of their time running at those intermediate frequencies.

How to report frequencies

If you have a Mac Studio M3 Ultra or MacBook Pro M5 you can add to this collection, please open Terminal and run the command
sudo powermetrics -n 1 -s cpu_power
which then prompts you for your admin password. A few seconds later the window will fill with a single set of measurements looking like this:

All I’d like is a copy containing 3 lines from that:

• Machine model at the top, to tell me which Mac it is, thus which chip.
• E-Cluster HW active residency, which contains a list of frequencies for the E cores.
• P-Cluster HW active residency, which contains a longer list of frequencies for the P cores.

To help, I have highlighted those three lines in the screenshot above.

Thank you.